Where vapor-liquid separation is required, such as a knockout drum, knockout tank, flash drum or compressor suction drum, it is integrated into the process unit. The separation vessel receives the flashed liquid mixture, which is then gravity separated and descends from the top vapor outlet to the bottom.

Challenge：

Typically, a collection tank located below the separation chamber collects the liquid by gravity flow, and level control is used for liquid extraction. This control maintains a vapor barrier and expels collected liquid at the same accumulation rate. In some separators, such as flash tanks, the liquid level must be maintained within an extremely narrow range for very tight control.

Product：

●  RF2000series guided wave radar level meter

The manufacturing technology of RF2000 series guided wave radar level gauges all come from our company. After years of demonstration by radar liquid level experts, the quality and quality are guaranteed in all aspects; RF2000 series guided wave radar level gauges have various forms and installation methods, which are almost suitable for The measurement of the entire liquid (interface) surface can also be applied to the measurement of dust, flour, sand and granular materials, which can completely replace the use of buoys and magnetic liquid level gauges; it has many advantages, such as during the measurement process, Its measurement accuracy is not affected by changes in medium density, temperature, pressure, etc.; it also has simple installation and debugging methods, and it can be used only by inputting configuration data. It is a relatively advanced liquid level instrument and is widely used in petroleum , chemical industry, electric power, metallurgy, pharmaceutical, food, oil and grain storage and other industries.

Features：

● Two-wire DC 24V power supply with low power consumption and HART communication protocol.

● The performance is not affected by the change of technological conditions such as the specific gravity of the medium, the dielectric constant, and the temperature within the specified range.

● The coaxial antenna (probe) assembly has a unique sealing form, no leakage, high pressure resistance, not easy to aging, and long life.

● The double-rod probe will not affect the correct measurement when part of the material hangs on it, and has high measurement accuracy.

● It can measure the medium with extremely low dielectric constant which cannot be measured by traditional guided wave radar.

● RF2000 series transmitters are suitable for medium liquid level measurement under high temperature and high pressure working conditions.

● The length of rod type probe rod can reach 0.5~6m, and the length of cable type probe rod can reach 21m

● The transmitter part (meter head) is interchangeable, more convenient for maintenance, good compatibility and high stability.

● The zero position and range can be adjusted locally, or remotely adjusted through a remote handheld operator, desktop or portable computer.

●  UHZ-517 series magnetic flap liquid level gauge

UHZ-517 series magnetic flap liquid level gauge is a new type of on-site display instrument. The product has the characteristics of simple structure, intuitive and novel reading, no blind spot in observation, large measurement range, safety and reliability, and convenient installation, use and maintenance. This product is widely used in petroleum, chemical industry, electric power, metallurgy, light industry, pharmaceutical, papermaking, environmental protection and other industries to provide on-site indication of the liquid level in various storage tanks, tanks and other containers, and the company’s production All kinds of liquid level transmitters and liquid level switches realize the automatic process control and measurement of various industries.

Features：

● Simple structure, intuitive and novel reading, no blind spot in observation, large measurement range, safe and reliable, easy to install, use and maintain.

● The float is made of 304, 316L, TA2 and TC4 materials, and the float has good high temperature resistance, which can reach 450°C.

● The welding process meets the requirements of PED welding process. The outer cylinder is made of 304 and 316L materials, and the maximum pressure resistance can reach 26Mpa.

● Optional local indication type, remote transmission type, and liquid level alarm type.

● According to the needs of customers, through various types of production, it can be applied to various working conditions.