Generators and gas turbines have integrated lubrication systems built in to prevent damage from excessive friction. A portion of lubricating oil is usually also used in hydraulic oil systems. Lubricants are typically stored in one-piece stainless steel and carbon steel tanks with level monitoring.

Challenge:

Fluid level monitoring of lube oil tanks ensures proper functioning of turbines, generators and other equipment with integrated lubrication systems.

Products:

● RF2000 Series Guided Wave Radar Level Meter

The manufacturing technology of RF2000 series guided wave radar level gauges all come from our company. After years of demonstration by radar liquid level experts, the quality and quality are guaranteed in all aspects; RF2000 series guided wave radar level gauges have various forms and installation methods, which are almost suitable for The measurement of the entire liquid (interface) surface can also be applied to the measurement of dust, flour, sand and granular materials, which can completely replace the use of buoys and magnetic liquid level gauges; it has many advantages, such as during the measurement process, Its measurement accuracy is not affected by changes in medium density, temperature, pressure, etc.; it also has simple installation and debugging methods, and it can be used only by inputting configuration data. It is a relatively advanced liquid level instrument and is widely used in petroleum , chemical industry, electric power, metallurgy, pharmaceutical, food, oil and grain storage and other industries.

Features:

● Two-wire DC 24V power supply with low power consumption and HART communication protocol.

● The performance will not be affected by the change of process conditions such as the specific gravity, dielectric constant and temperature of the medium within the specified range.

● The coaxial antenna (probe) assembly has a unique sealing form, no leakage, high pressure resistance, not easy to aging, and long life.

● The double-rod probe will not affect the correct measurement when part of the material hangs on it, and has high measurement accuracy.

● It can measure the medium with extremely low dielectric constant which cannot be measured by traditional guided wave radar.

● RF2000 series transmitters are suitable for medium liquid level measurement under high temperature and high pressure working conditions.

● The length of the rod type probe rod can reach 0.5~6m, and the length of the cable type probe rod can reach 21m

● The transmitter part (meter head) is interchangeable, more convenient for maintenance, good compatibility and high stability.

● The zero position and range can be adjusted on site, and can also be adjusted remotely through a remote handheld operator, desktop, or portable computer.

● UHZ-517 Series Magnetic Flap Level Gauge

UHZ-517 series magnetic flap liquid level gauge is a new type of on-site display instrument. The product has the characteristics of simple structure, intuitive and novel reading, no blind spot in observation, large measurement range, safety and reliability, and convenient installation, use and maintenance. This product is widely used in petroleum, chemical industry, electric power, metallurgy, light industry, pharmaceutical, papermaking, environmental protection and other industries to provide on-site indication of the liquid level in various storage tanks, tanks and other containers, and the company’s production All kinds of liquid level transmitters and liquid level switches realize the automatic process control and measurement of various industries.

Features:

● Simple structure, intuitive and novel readings, no blind spot in observation, large measurement range, safe and reliable, easy to install, use and maintain.

● The float is made of 304, 316L, TA2 and TC4 materials, and the float has good high temperature resistance, up to 450°C.

● The welding process meets the requirements of PED welding process. The outer cylinder is made of 304 and 316L materials, and the maximum pressure resistance can reach 26Mpa.

● Optional local indication type, remote transmission type, and liquid level alarm type.

● According to customer needs, through various types of production, it can be applied to various working conditions.

● LC series intelligent displacer liquid (boundary) level transmitter

LC series displacer type liquid level gauge is designed according to the principle of Archimedes buoyancy, and is used to measure liquid level, interface and density of liquid. It has high measurement stability, especially suitable for liquid level/interface measurement occasions with small range, high temperature, high pressure, and low density, and can meet the interface measurement with small medium density difference. The transmitter can conveniently perform remote configuration and management (monitoring) of the transmitter through the HART communication protocol, using a PC or a general-purpose handheld terminal, and can also be operated with conventional local keys.

Features:

● Double SIL 2 certification of France BV and Shanghai SITIIAS.

● Provides 4-20 mA and with HART, 475 Field Communicator for on-site configuration, calibration and diagnostics.

● Comprehensive fault diagnosis, warning and status history.

● Meet the PED pressure vessel certification required by the European Union, and the applicable pressure can reach up to 42MPa.

● Can be used in non-steam applications up to a maximum process temperature of 500°C.

● CSA, ATEX and IEC explosion-proof, intrinsically safe certification.

● Process parameters can be adjusted online.

● The head of the transmitter can be switched freely in 8 directions without affecting the on-site process.

● Suitable for interface measurement and density detection.

● (EMC) EU Electromagnetic Compatibility Directive CE certification.

● RF9300 Series 26G Pulse Radar Level Meter

RF9300 series is a 26G high-frequency pulse radar level measuring instrument, which outputs 4-20mA analog signal, and the maximum measurement distance can reach 70 meters. The antenna is further optimized, and the new fast microprocessor can perform signal analysis and processing at a higher rate, so that the instrument can be used for very complex measurement conditions in reactors or solid storage bins.

The high-frequency microwave pulse emits a narrow microwave pulse, which is transmitted downward through the antenna. After the microwave touches the surface of the measured medium, it is reflected back, received by the antenna system again and transmitted to the electronic circuit part to be automatically converted into a level signal.

Features:

● Non-contact radar, no wear, no pollution.

● The antenna is small in size and easy to install.

● Shorter wavelength for better reflection on inclined solid surfaces.

● The measurement blind area is smaller, and it will also achieve good results for small tank measurements.

● The beam angle is small and the energy is concentrated, which not only enhances the echo capability, but also helps to avoid interference.

● Almost unaffected by corrosion and foam.

● Almost unaffected by changes in water vapor, temperature and pressure in the atmosphere.

● Severe dust environment will not affect electromagnetic wave work.

● High signal-to-noise ratio for better performance even in fluctuating conditions.

● High frequency, the best choice for measuring solid and low dielectric constant media.

● UQK6 series float (float) liquid level switch

UQK-6000/6100 series float liquid level switch and UQK-6200 series float liquid level switch are designed and manufactured according to high temperature and high pressure applications. The products refer to ANSIB31.1 standard design, adopt advanced three-magnet mechanism switch, reasonable and reliable structure High performance, can accurately identify the liquid level under harsh working conditions, and perform switching actions. It is suitable for the control, alarm and fault interlock of various high-temperature, high-pressure and open container liquid levels in the production process of petroleum, chemical, electric power, food, pharmaceutical and other industries.

When UQK series products are designed and manufactured, they fully consider the different forms of process connection in the imported equipment in the petrochemical industry, and design a variety of installation methods with various structures. It is an ideal substitute for similar switches in Europe and America.

Features:

● Unique “three magnets” mechanism, no spring, no cam, no friction surface.

● Explosion-proof sealed structure, alumina ceramic switch body.

● Suitable for high temperature, high pressure, low temperature, ultra-low temperature, shockproof occasions.

● ANSI B31.1 standard design.
●  316L guide rod, high temperature resistant permanent rare earth magnet.