Due to the difference in density between gas and liquid, when the liquid and gas are mixed and flow together, if there is an obstacle, the gas will deflect and go away, while the liquid will continue to move forward due to inertia, and the forward liquid will adhere to the blocking wall and collect downward, and then discharge tube discharge.

Challenge：

In the process of producing ultrapure water (WFI), the purified water is first sent to a steam separator. The purified water is evaporated and sent to the condenser. Evaporation is achieved by a heat exchanger supplied with saturated steam. To ensure that the heat exchanger is always covered with distilled water, the liquid level needs to be reliably measured. For maximum efficiency, the pressure within the vapor separator must be kept constant.

Products：

●  IGP10/IAP10 Series Industrial Pressure Transmitte

IGP10/IAP10 series industrial pressure transmitters use high-precision, high-stability sensor components, and through high-reliability intelligent electronic modules, convert the gauge pressure or absolute pressure of the measured medium into two-wire 4~20mA with HART Standard signal for communication.

IGP10 is suitable for the measurement of gauge pressure, and IAP10 is suitable for the measurement of absolute pressure. This series of products has the characteristics of small size, light weight, direct installation, high performance and wide range measurement capability, making this transmitter a very common and effective process pressure measuring instrument.

Features：

● Full support for three buttons, using a fully isolated HART protocol intelligent module, which is very convenient for on-site configuration.

● With two-wire input and output full isolation, the transmitter has super anti-interference.

● With a high-brightness white backlight meter, the indication is eye-catching and the appearance is fashionable.

● Wide range coverage. ~0.2KPa~40Mpa, zero and span adjustments do not affect each other.

● Accuracy is better than 0.1 grade, strong ability to resist one-way overload, high stability, migration ratio 100:1.

● Ultra-small temperature drift, the performance reaches the advanced level in the industry, no mechanical transmission parts, less maintenance work, strong and anti-vibration.

● The material of the diaphragm in contact with the medium is optional, and the explosion-proof shell structure has explosion-proof and intrinsically safe explosion-proof certification.

●  IGP/IAP/IDP20 Series Pressure Transmitter

IGP/IAP/IDP20 series pressure transmitters have various forms, which can accurately and reliably measure gauge pressure, absolute pressure, differential pressure or liquid level, etc. The product outputs two-wire 4~20mADC standard signal, and can also be conveniently communicated through HART. Use software for remote configuration and monitoring.

Features：

● Support three buttons, adopt fully isolated HART protocol intelligent module, convenient for on-site configuration.

● With two-wire input and output full isolation, the transmitter has super anti-interference.

● With a high-brightness white backlight meter, the indication is eye-catching and the appearance is fashionable.

● The range covers a wide range of 0~0.2KPa~40Mpa, zero and span adjustments do not affect each other.

● Accuracy is better than 0.1 grade, strong ability to resist one-way overload, high stability, migration ratio 100:1.

● Ultra-small temperature drift, performance surpassing similar domestic products, no mechanical transmission parts, less maintenance work, strong and anti-vibration.

● All common parts, sensor and electronic board interchange does not affect the characteristics of the transmitter, more convenient maintenance.