The sterilizing filter mainly uses a microfiltration filter element with a large specific surface area and a filtration accuracy of 0.22 μm or more. It is mainly used to prevent impurities in the air, harmful bacteria, and microorganisms from interfering, causing changes in water quality, products, and the environment of the sterile room.

Challenge：

Separation of substances or cellular components is often required in the manufacture of pharmaceuticals. One method of separation or excretion is filtration. High product quality can only be achieved if the filter works without problems. Therefore, sufficient filtering power must be ensured at all times. This requires long-term monitoring filters.

产品：

●  RF2000Series Guided Wave Radar Level Meter

The manufacturing technology of RF2000 series guided wave radar level gauges all come from our company. After years of demonstration by radar liquid level experts, the quality and quality are guaranteed in all aspects; RF2000 series guided wave radar level gauges have various forms and installation methods, which are almost suitable for The measurement of the entire liquid (interface) surface can also be applied to the measurement of dust, flour, sand and granular materials, which can completely replace the use of buoys and magnetic liquid level gauges; it has many advantages, such as during the measurement process, Its measurement accuracy is not affected by changes in medium density, temperature, pressure, etc.; it also has simple installation and debugging methods, and it can be used only by inputting configuration data. It is a relatively advanced liquid level instrument and is widely used in petroleum , chemical industry, electric power, metallurgy, pharmaceutical, food, oil and grain storage and other industries.

Features：

● Two-wire DC 24V power supply with low power consumption and HART communication protocol.

● The performance will not be affected by the change of process conditions such as the specific gravity, dielectric constant and temperature of the medium within the specified range.

● The coaxial antenna (probe) assembly has a unique sealing form, no leakage, high pressure resistance, not easy to aging, and long life.

● The double-rod probe will not affect the correct measurement when part of the material hangs on it, and has high measurement accuracy.

● It can measure the medium with extremely low dielectric constant which cannot be measured by traditional guided wave radar.

● RF2000 series transmitters are suitable for medium liquid level measurement under high temperature and high pressure working conditions.

● The length of the rod type probe rod can reach 0.5~6m, and the length of the cable type probe rod can reach 21m

● The transmitter part (meter head) is interchangeable, more convenient for maintenance, good compatibility and high stability.

● The zero position and range can be adjusted on site, and can also be adjusted remotely through a remote handheld operator, desktop, or portable computer.

●  UQK6Series displacer (float) liquid level switch

UQK-6000/6100 series float liquid level switch and UQK-6200 series float liquid level switch are designed and manufactured according to high temperature and high pressure applications. The products refer to ANSIB31.1 standard design, adopt advanced three-magnet mechanism switch, reasonable and reliable structure High performance, can accurately identify the liquid level under harsh working conditions, and perform switching actions. It is suitable for the control, alarm and fault interlock of various high-temperature, high-pressure and open container liquid levels in the production process of petroleum, chemical, electric power, food, pharmaceutical and other industries.

When UQK series products are designed and manufactured, they fully consider the different forms of process connection in the imported equipment in the petrochemical industry, and design a variety of installation methods with various structures. It is an ideal substitute for similar switches in Europe and America.

Features：

● Unique “three magnetic” mechanism, no spring, no cam, no friction surface.

● Explosion-proof sealed structure, alumina ceramic switch body.

● Suitable for high temperature, high pressure, low temperature, ultra-low temperature, shockproof occasions.

● ANSI B31.1 standard design.

● 316L guide rod, high temperature resistant permanent rare earth magnet.

● Support multiple operation and configuration methods such as host computer setting software, mobile phone APP, LCD keyboard module, tank side meter, etc.

● 24VDC, 220VAC two power supply models.

● Simple installation structure, suitable for various installation forms on site.

●  RF9300Series 26G Pulse Radar Level Meter

RF9300 series is a 26G high-frequency pulse radar level measuring instrument, which outputs 4-20mA analog signal, and the maximum measurement distance can reach 70 meters. The antenna is further optimized, and the new fast microprocessor can perform signal analysis and processing at a higher rate, so that the instrument can be used for very complex measurement conditions in reactors or solid storage bins.

The high-frequency microwave pulse emits a narrow microwave pulse, which is transmitted downward through the antenna. After the microwave touches the surface of the measured medium, it is reflected back, received by the antenna system again and transmitted to the electronic circuit part to be automatically converted into a level signal.

Features：

● Non-contact radar, no wear, no pollution.

● The antenna is small in size and easy to install.

● Shorter wavelength for better reflection on inclined solid surfaces.

● The measurement blind area is smaller, and it will also achieve good results for small tank measurements.

● The beam angle is small and the energy is concentrated, which not only enhances the echo capability, but also helps to avoid interference.

● Almost unaffected by corrosion and foam.

● Almost unaffected by changes in water vapor, temperature and pressure in the atmosphere.

● Severe dust environment will not affect electromagnetic wave work.

● High signal-to-noise ratio for better performance even in fluctuating conditions.

● High frequency, the best choice for measuring solid and low dielectric constant media.